Effects of Precipitation on the Air Quality Index, PM2.5 Levels and on the Dry Deposition of PCDD/Fs in the Ambient Air

The effects of 9 precipitation events in Suzhou City in Anhui Province, China, on the air quality index (AQI), PM2.5, and dry deposition flux of PCDD/Fs (polydibenzo-p-dioxins and polydibenzofurans) were investigated. A total of 7 precipitation events were positive contributes to the reduction of AQI;among them, the AQI were between 23 and 216, with an average of 75, the PM2.5 concentrations were between 5.0 and 169 mu g m-3, with an average of 25 mu g m-3, while the total-PCDD/F-TEQ dry deposition flux ranged from 149 to 1034 pg WHO2005-TEQ m-2 day-1 and averaged 315 pg WHO2005-TEQ m-2 day-1. By comparing the average AQI and PM2.5, respectively, during and after rainfall with that before rainfall, the results indicated that the average reduction fractions of AQI were 26% and 44%, respectively, while those of PM2.5 were 58% and 43%. In addition, the effect of precipitation on the average reduction fraction of total PCDD/F-TEQ dry deposition flux was 31%. However, in the other 2 AQI elevation events, the AQI were between 23 and 100, and averaged 51;when comparing the average AQI and PM2.5 concentrations, during and after the rain with that before the rain, the increases in AQI were 42% and 49%, respectively, while the increases in PM2.5 concentration were 26% and 29%, respectively. The above results show that, on the whole, rain and snow improved the air quality. This is because rainwater removes particles or dissolved gaseous pollutants from the atmosphere and brings aerosols to the ground. However, in some cases, the increase of source emissions and atmospheric vertical convection, the effect of precipitation or air humidity increased the AQI and elevated the concentration of PM2.5, and dry deposition flux of PCDD/Fs. The results of this study provide useful information for both scientific communities and air quality management.

Formation of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) in the electrochemical oxidation of polluted waters with pharmaceuticals used against COVID-19.

The COVID-19 pandemic has produced a huge impact on our lives, increasing the consumption of certain pharmaceuticals, and with this, contributing to the intensification of their presence in wastewater and in the environment. This situation demands the implementation of efficient remediation technologies, among them, electrochemical oxidation (ELOX) is one the most applied. This work studies the application of ELOX with the aim of eliminate pharmaceuticals used in the fight against COVID-19, assessing its degradation rate, as well as the risk of formation of toxic trace by-products, such as unintentional POPs like polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs). To this end, model solutions containing 10 mg L-1 of dexamethasone (DEX), paracetamol (PAR), amoxicillin (AMX), and sertraline (STR) with two different electrolytes (NaCl and Na2SO4) have been evaluated. However, electrochemical systems that contain chloride ions in solution together with PCDD/Fs precursor molecules may lead to the formation of these highly toxic by-products. So, PCDD/Fs were quantified under conditions of complete degradation of the drugs. Furthermore, the presence of PCDD/Fs precursors such as chlorophenols was determined, as well as the role of Cl-, Cl• and SO 4 • - radicals in the formation of the by-products and PCDD/Fs. The maximum measured concentration of PCDD/Fs was around 2700 pg L-1 for the amoxicillin case in NaCl medium. The obtained results emphasise the importance of not underestimating the potential formation of these highly toxic trace by-products, in addition to the correct selection of oxidation processes and operation variables, in order to avoid final higher toxicity in the medium.